- Theory: removing 1 ppm of nitrate takes roughly 0.05 to 0.37 mL of 5% white vinegar per US gallon (5 to 37 mL per 100 gallons), or about one eighth of that in 80-proof vodka.
- Start: 0.8 mL of vinegar (0.1 mL of vodka) per 25 gallons of net water a day for 3 days, then double it for days 4 to 7.
- Ceiling: 0.6 mL of vinegar (0.075 mL of vodka) per gallon per day.
- Rule: ramp by test results, never by the math. The theory is total carbon over days, not a dose.
Search for a carbon dosing calculator and you'll usually find a schedule, not an answer to the question people actually ask: how many mL of vinegar does it take to drop my nitrate by 1 ppm? There is an answer, with honest error bars, and this page works it out. It also gives you the safe starting dose for your tank, because the number you calculate and the amount you can safely add in a day are very different things.
Carbon dosing means adding a simple organic carbon source, such as vinegar (acetic acid) or vodka (ethanol), so that bacteria in the tank grow faster. As they grow they take nitrate and phosphate out of the water, and a protein skimmer removes the bacteria. For the bigger picture on nutrient targets, see nitrate and phosphate in reef tanks.
Free vinegar and vodka dosing calculator
Enter your net water volume: display plus sump, minus rock and sand. If you're not sure, our reef tank volume calculator helps, and it's safer to guess low.
Want the full week-by-week ramp with nitrate-based stopping points and saved history? That's the carbon dosing ramp planner in Coral Compass Pro (coming soon).
How many mL of vinegar per ppm of nitrate?
Here is the theoretical carbon needed to remove 1 ppm of nitrate (measured as NO₃, which is how most hobby kits report it):
| Net water | 5% vinegar per 1 ppm nitrate | 80-proof vodka per 1 ppm nitrate |
|---|---|---|
| 20 gal | 0.92 to 7.3 mL | 0.11 to 0.89 mL |
| 50 gal | 2.3 to 18.3 mL | 0.28 to 2.23 mL |
| 75 gal | 3.4 to 27.5 mL | 0.42 to 3.34 mL |
| 100 gal | 4.6 to 36.7 mL | 0.56 to 4.46 mL |
| 150 gal | 6.9 to 55.0 mL | 0.84 to 6.68 mL |
Multiply by the ppm you want to remove. For a 100 gallon tank going from 20 to 5 ppm (15 ppm), that's about 69 to 550 mL of vinegar in total, spread over weeks.
How we got these numbers
- 1 ppm of nitrate is 1 mg of NO₃ per liter, or 16.1 µmol per liter.
- 5% white vinegar holds about 50 mg of acetic acid per mL (1.67 mmol of carbon). 80-proof vodka is 40% ethanol by volume, about 316 mg of ethanol per mL (13.7 mmol of carbon). That's why vodka carries about 8.2 times the carbon of vinegar per mL, and why the usual rule is to use 8 times the volume of vinegar.
- Low end, denitrification: bacteria that breathe nitrate instead of oxygen use 5 acetate molecules for every 8 nitrate molecules and release the nitrogen as gas. This is the least carbon that could possibly do the job.
- High end, bacterial growth: in a well-oxygenated, skimmed tank, carbon dosing mostly works by growing bacteria that build nitrogen into their cells, as our denitrification guide explains. We assumed bacterial biomass at about 5 carbon atoms per nitrogen atom and that about half the carbon is burned for energy rather than built into cells. Both are rough, typical values, not measurements from your tank.
Real tanks usually need more than the theory, because some bacteria are never skimmed out, some carbon feeds other microbes, and fish food keeps adding nitrate every day. Treat the table as a sense of scale, which is mostly useful for showing that you never need large volumes.
Starting dose and daily ceiling by tank size
The widely used vodka method from Jörg Kokott starts at 0.1 mL of 80-proof vodka per 25 gallons of net water a day for days 1 to 3, doubles it for days 4 to 7, then adds 0.5 mL a day each week until nitrate and phosphate start to fall. At that point you hold the dose, and you halve it once both are undetectable. For vinegar, use 8 times the volume.
| Net water | Vinegar, days 1–3 | Vinegar, days 4–7 | Vodka, days 1–3 | Vinegar ceiling a day |
|---|---|---|---|---|
| 20 gal | 0.64 mL | 1.28 mL | 0.08 mL | 12 mL |
| 50 gal | 1.60 mL | 3.20 mL | 0.20 mL | 30 mL |
| 75 gal | 2.40 mL | 4.80 mL | 0.30 mL | 45 mL |
| 100 gal | 3.20 mL | 6.40 mL | 0.40 mL | 60 mL |
| 150 gal | 4.80 mL | 9.60 mL | 0.60 mL | 90 mL |
The ceiling is a stop sign, not a goal. Many tanks reach their target well below it. Commercial carbon products, such as Red Sea NO₃:PO₄-X, have their own label doses; follow the label rather than converting it to vinegar.
How to dose vinegar or vodka safely
- Test first. Know your nitrate and phosphate before you start, and log them. Our free reef test log keeps the trend in one place. A low-range phosphate test matters here; see reef test kits.
- Check your N:P ratio. Bacteria use nitrogen and phosphorus together. If phosphate is already near zero, carbon dosing will bottom it out while nitrate barely moves. Run your numbers in the nitrate-phosphate ratio calculator.
- Make sure the skimmer is working. The skimmer is what actually removes the bacteria; see protein skimmers. Expect it to produce more, wetter skimmate as the dose rises.
- Measure with a syringe, not drops, and use plain distilled white vinegar or plain 80-proof vodka with nothing added.
- Spread the dose out. Bacteria use oxygen to burn the carbon: 1 g of acetic acid (20 mL of vinegar) uses about 1.07 g of oxygen. Dumped in at once, 50 mL of vinegar in 100 gallons could in theory use about 7 mg/L of oxygen, roughly all the oxygen in the water. Split the daily amount or drip it with a dosing pump during the day, into a high-flow spot.
- Retest nitrate and phosphate once or twice a week and change the dose only between tests. When both start to fall, stop increasing.
Disclosure: Coral Compass may earn a commission when you buy through links on this page, at no extra cost to you. Retailer links are marked as sponsored, and this doesn't change what we recommend. Full disclosure.
Products to start with, if you need them: carbon dosing and nutrient-control products(affiliate link) and low-range nitrate and phosphate test kits(affiliate link).
Warning signs to cut back
- Cloudy water or white, stringy bacterial film on rock and glass: the bacteria are growing faster than the skimmer can remove them. Cut the dose in half and add aeration.
- Nitrate or phosphate at zero, especially with paling corals or new brown film: you've overshot. Low nutrients stress corals and favor dinoflagellates and cyanobacteria.
- Fish breathing hard, or pH sagging after each dose: the bacteria are using oxygen and releasing carbon dioxide faster than the water can exchange gas. Stop dosing, increase surface agitation, and restart lower and more spread out.
Most reefers settle on a nitrate of about 2 to 20 ppm and phosphate of about 0.03 to 0.1 ppm. Our ultra-low nutrient research summary explains why chasing zero backfires, and the glossary covers the terms. Once nutrients are stable and corals start growing, alkalinity and calcium use rises; the free dosing calculator covers those doses.
FAQ
How much vinegar removes 1 ppm of nitrate? In theory, somewhere between about 0.05 and 0.37 mL of 5% white vinegar per US gallon of net water, or roughly 5 to 37 mL per 100 gallons. The low number assumes all of the carbon drives denitrification; the high number assumes it feeds bacterial growth, which is how carbon dosing mostly works in a skimmed reef tank. It is carbon spread over days, not a single dose, because your tank keeps making nitrate while you remove it.
How much vodka removes 1 ppm of nitrate? About one eighth of the vinegar volume: roughly 0.006 to 0.045 mL of 80-proof vodka per US gallon. One mL of 80-proof vodka carries about 8.2 times the carbon of one mL of 5% vinegar.
What is a safe starting dose for vinegar dosing? Start with the vodka method's schedule converted to vinegar: 0.8 mL of 5% vinegar per 25 gallons of net water a day for days 1 to 3 (0.1 mL of vodka), double it for days 4 to 7, then raise it slowly week by week only while nitrate and phosphate stay high. Hold the dose once they start falling.
What is the maximum vinegar dose for a reef tank? We cap the ramp at 0.6 mL of 5% vinegar (0.075 mL of vodka) per gallon per day, the upper end of what long-time carbon dosers report as safe. Many tanks need far less. Cloudy water, white bacterial film, or nitrate and phosphate hitting zero are all signs to cut back.
Is vinegar or vodka better for carbon dosing? Both feed the same kind of bacteria. Vodka is more concentrated, so it needs smaller, harder-to-measure volumes; vinegar is cheap and easier to measure accurately on small tanks because you dose about 8 times the volume. Use plain distilled white vinegar or plain 80-proof vodka with nothing added.
Why isn't my carbon dosing lowering nitrate? The most common reason is that phosphate ran out first. Bacteria need both nitrogen and phosphorus, roughly 16 to 1 by atoms, so if phosphate is near zero they stop growing and nitrate stays high. Check your ratio with the nitrate-phosphate ratio calculator. A weak skimmer, a dose that is still too low, or overfeeding can also keep nitrate up.
Sources
- "Vodka Dosing" by Genetics and Stony_Corals, Reefkeeping Magazine (2008), protocol from Jörg Kokott (starting dose, ramp, and maintenance).
- Reef Central vodka dosing table thread (vinegar is about 8 times the vodka volume; 0.3 to 0.6 mL of vinegar per gallon as a maintenance ceiling, citing Randy Holmes-Farley's tests).
- Reef2Reef "New Vodka and Vinegar Dosing Charts" thread, Randy Holmes-Farley on oxygen use (1 g acetic acid uses about 1.1 g of oxygen) and spreading doses through the day.
- Denitrification with acetate: 5 CH₃COO⁻ + 8 NO₃⁻ + 3 H⁺ → 10 HCO₃⁻ + 4 N₂ + 4 H₂O (standard wastewater-treatment stoichiometry). Molar masses: nitrate 62.00, acetic acid 60.05, ethanol 46.07 g/mol; ethanol density 0.789 g/mL.