Dinoflagellates in a reef tank: how to identify and fix them, and when UV fits

How to tell dinos from cyano and diatoms, why bottomed-out nitrate and phosphate invite them, which genus you have, and a week-by-week fix plan you can track in a free test log.

Quick answer
  • Look like: brown, golden, or greenish snotty films with long stringy strands and trapped bubbles, often on sand, rock, and coral bases.
  • Confirm with a microscope at 100 to 400x. Dinos are single, armored cells, and many swim. Cyano is thin filaments; diatoms are glassy and glide.
  • Usual cause: nitrate and phosphate that have bottomed out, plus little competition from bacteria and other algae.
  • Fix: stop phosphate removers and carbon dosing, bring nitrate and phosphate to steady measurable levels, add biodiversity, and siphon films out.
  • Be careful: some dinos, such as Ostreopsis, make potent toxins. Wear gloves and eye protection.

Dinoflagellates, usually just called dinos, are one of the most frustrating problems in reefkeeping. They look like a lot of other nuisance growths, they ignore the usual "cut nutrients" advice, and the fix depends on which kind you have. Most outbreaks still follow the same pattern, and a steady, measured plan works for most tanks. Identification, the cause, and a fix you can track in our free reef test log are below.

What dinoflagellates are

Dinoflagellates are single-celled organisms with two whip-like flagella. Many photosynthesize, and some are close relatives of the zooxanthellae living inside your corals (see coral symbiosis). The nuisance kinds live on surfaces, where they form slimy films held together by mucus. That mucus traps oxygen from photosynthesis, which is why dino films are so often full of bubbles and stringy strands that wave in the flow.

They aren't algae in the usual sense, and they aren't bacteria. That matters, because the tools that work on hair algae (starving it of nutrients) and on cyanobacteria often make dinos worse.

How to identify dinos (and rule out cyano and diatoms)

Three growths cause most brown or reddish films in reef tanks. Here's how to tell them apart:

DinoflagellatesCyanobacteria (cyano)Diatoms
ColorBrown, golden, or greenish; occasionally reddishRed, maroon, purple, or dark greenTan to golden brown
TextureSnotty film with long, stringy strands and many bubblesThin mat that peels off in sheets; slimy, sometimes bubblyDusty brown coating that wipes off easily
Night behaviorMany types fade or vanish from the sand at night and return with the lightsUsually still there at nightStill there
Under a microscopeSingle round, oval, or teardrop cells, often armored; many swim with a quick, spinning motionStrings (filaments) of very small cellsRigid, glassy cells shaped like boats, rods, or chains; they glide slowly
Typical settingNew tanks and tanks where nitrate and phosphate read zeroExcess nutrients, low flow, dead spotsNew tanks, and silicate in source water

Do the microscope check

A basic student microscope that reaches 100 to 400x is enough, and it's the most reliable way to know what you're fighting. Pipette or baster a little of the film into a small cup, put a drop on a slide, and look right away while the cells are still alive and moving. Take a short phone video through the eyepiece; reef forums are good at matching it to a genus.

The common aquarium genera

Treatments differ by genus, so it helps to know which one you have:

You don't need a perfect ID to start the nutrient plan below, which helps against all of them. It mainly tells you whether a UV sterilizer is worth adding.

Dinoflagellates brown/goldensnotty strandswith bubbles Often fades from sandat night (many types) scope: single armoredcells, many spin Cyanobacteria red/purple ordark green matpeels in sheets Slimy film on sandand rock scope: thin stringsof tiny cells Diatoms light browndusty film,wipes off easily Common in new tanks;usually passes scope: glassy(silica) shells
Original Coral Compass illustration, not to scale. Typical patterns only; they vary by genus and tank, so confirm with a microscope at 100–400×.

Why dinos take over: the nutrient trap

Most dino outbreaks show up in one of two situations: a new tank whose rock and sand are still nearly sterile, or an established tank where nitrate and phosphate have been pushed to zero with GFO, lanthanum, carbon dosing (vodka or vinegar), or very heavy export. In both, the usual competitors, bacteria and other algae, are thin on the ground, and dinos can take over the surfaces.

A zero reading doesn't mean the water has no nutrients. It means whatever is growing is taking them up as fast as they appear. That's why the classic "starve the algae" advice backfires with dinos, and why our algae outbreak testing guide treats zero nitrate and phosphate as a warning sign, not a goal. For the background on how far is too far, see ultra-low nutrient systems.

The fix plan, step by step

  1. Test and log a baseline. Measure nitrate, phosphate (with a low-range test, not a hobby-grade high-range kit), alkalinity, and salinity. Enter them in the reef test log, and add a note describing how much of the tank the film covers. You'll compare against this every few days.
  2. Stop the things pulling nutrients to zero. Take GFO and lanthanum offline, pause carbon dosing, and stop any "anti-algae" products. Many reefers also reduce skimming for a while.
  3. Bring nitrate and phosphate up to measurable levels. Feed more, or dose nitrate and phosphate products made for reef tanks, a little at a time. Most successful approaches aim for a few ppm of nitrate and phosphate around 0.03 to 0.1 ppm, held steady. Use our nitrate to phosphate ratio calculator to keep the two in a sensible balance, and our nitrate and phosphate guide for the reasoning.
  4. Add competition. Bottled nitrifying bacteria, live phytoplankton, copepods, and a cup of sand or a piece of rock from an established, dino-free tank add the diversity that eventually crowds dinos out.
  5. Remove films physically. Siphon films through a fine filter sock and return the water, so you remove the dinos without doing a big water change. Large water changes reset the nutrient levels you're trying to build and add fresh trace elements the dinos can use.
  6. Add a UV sterilizer if your genus spends time in the water. It's most useful for Ostreopsis and other types you can see drifting in the water. Size it from the maker's saltwater flow rating; see the UV fit worksheet below.
  7. Use a blackout only as a boost. Three days of darkness (cover the tank, lights off) can knock some films back. Corals handle a short blackout well, but feed lightly and keep flow running. Don't expect it to cure an outbreak on its own.

Some reefers also use hydrogen peroxide or commercial dino treatments. They can work on some outbreaks but can also harm corals, invertebrates, and the bacteria you're trying to build up, and dinos usually return if nutrients stay at zero. If you try one, follow its label exactly and keep the nutrient plan going.

UV sterilizers for dinos: fit and buying worksheet

Should you buy UV at all?

How to read a manufacturer flow table

UV makers publish how much water each model can treat at a given UV dose. More flow means less exposure per pass, so the same unit has several ratings. Aqua Ultraviolet's Classic series is a clear example: its saltwater table lists the flow at each dosage, rated at end of lamp life (14 months), and Aqua UV says the 30,000 or 45,000 µW/cm² columns are the reef range, while the 75,000–90,000 columns are for fish-only disease control because higher doses also remove the plankton a reef feeds on.

Aqua UV ClassicSaltwater tank size listed30,000 µW/cm² (max flow)45,000 µW/cm²90,000 µW/cm² (min flow)
8 Wto 70 gal642 gph428 gph214 gph
15 Wto 75 gal700 gph466 gph233 gph
25 Wto 150 gal1,200 gph800 gph400 gph
40 Wto 325 gal2,900 gph1,930 gph967 gph

Source: Aqua Ultraviolet's own Classic product pages (linked in the table), "Recommended Flow Rate for UV Dosages" and "Information for Reef Tanks", checked Nov 5, 2026. Ratings are the maker's; we have not tested them and they are not a dino kill rate.

Compare two units for your tank

CheckExample: 75 gal display + sumpClassic 15 WClassic 25 W
Listed saltwater tank size~90 gal systemto 75 gal (under)to 150 gal (fits)
Maker's reef-range flow (30,000–45,000 columns)you set it with a valve466–700 gph800–1,200 gph
Can your feed deliver that and no more?return tee + ball valve, or a small dedicated pumpthrottle to the column you pick (e.g. ≤466 gph)throttle to the column you pick (e.g. ≤800 gph)
Space and serviceroom to pull the lamp and quartz sleevecheck the maker's length and clearance (Aqua UV lists 16 in long for the 15 W)
Lamp upkeepratings assume a lamp up to 14 months oldcheck the manual's lamp-change interval and current lamp price before you buy

Plumbing constraints

Disclosure: Coral Compass may earn a commission when you buy through links on this page, at no extra cost to you. Retailer links are marked as sponsored, and this doesn't change what we recommend. Full disclosure.

Once you have checked fit, flow and service room, compare saltwater flow ratings across models in the UV sterilizers at Bulk Reef Supply(affiliate link). Keep the nutrient plan above as the main fix, and track every change in the test log.

Track it in the test log

Dino fixes take weeks, and it's easy to lose track of what changed. A simple routine:

Most tanks see the films shrink within two to four weeks once nitrate and phosphate stay measurable, though stubborn outbreaks can take two months or more. After they're gone, keep nutrients steady and bring back export slowly. Our reef testing schedule covers how often to test once things settle.

Safety: some dinos are toxic

Ostreopsis produces palytoxin-like compounds, some of the most potent marine toxins known. In the wild, Ostreopsis blooms have been tied to respiratory illness in people exposed to sea spray; during the 2005 outbreak on the coast of Genoa, Italy, researchers detected putative palytoxin in the bloom (Ciminiello et al. 2006). In an aquarium:

Some dinos also kill snails and other cleanup crew, so losing snails during an outbreak is another clue. Hold off adding new cleanup crew until things improve.

New to some of these terms? See dinos and cyano in the reef glossary, or the dinoflagellate section of our pests and diseases guide. If your sample turns out to be cyano, follow the cyanobacteria (red slime) guide instead.

FAQ

How do I know if I have dinos or cyano? Look at a sample under a microscope at 100 to 400x. Dinoflagellates are single armored cells, often with a visible groove, and many swim with a fast, spinning motion. Cyanobacteria are thin strings of tiny cells, usually red, purple, or dark green, that peel off in sheets. Without a microscope, dinos are more often brown or golden with long stringy, bubbly strands, and many types fade from the sand at night.

Why do dinoflagellates show up in a reef tank? Most outbreaks start when nitrate and phosphate bottom out, especially in new tanks with little bacterial diversity or tanks running strong phosphate removers or carbon dosing. With little competition from bacteria and other algae, dinos take over the surfaces. Zero readings do not mean zero nutrients; the dinos are consuming them.

What nitrate and phosphate levels help get rid of dinos? There is no tested magic number, but most successful hobby approaches bring nitrate up to a few ppm and phosphate into a measurable range, often around 0.03 to 0.1 ppm, and then hold them steady for weeks. The goal is never reading zero again, not a sudden spike.

Will a blackout kill dinoflagellates? A blackout of about three days can knock some outbreaks back, especially film-forming types on rock, but dinos usually return if the nutrient imbalance is still there. Treat a blackout as one tool alongside raising nutrients, not as the cure.

Are reef tank dinoflagellates dangerous to people? Some can be. Ostreopsis, one of the common aquarium genera, produces palytoxin-like compounds, and wild Ostreopsis blooms have been linked to respiratory illness in people exposed to sea spray. Wear gloves and eye protection when siphoning or scrubbing films, don't boil or blast rock coated in them, and wash up afterward.

How long does it take to get rid of dinos? Expect several weeks. Many tanks see films shrink within two to four weeks once nitrate and phosphate stay measurable, but stubborn outbreaks can take two months or more. Changing one thing at a time and logging tests helps you see what is working.

What flow rate should a UV sterilizer have for dinos? Use the manufacturer's saltwater flow table for the exact model; lower flow means more UV exposure per pass. Aqua Ultraviolet, for example, lists flows at several dosage columns and says its 30,000 to 45,000 columns suit reef tanks. There is no proven universal flow or wattage that clears dinos, so treat UV as a support tool for free-floating types alongside the nutrient plan.

Will a UV sterilizer get rid of dinos on its own? No. UV only treats water that passes through it, so it can help with types that spend time in the water column, such as Ostreopsis, but it does little for types that stay on rock or sand. Raising and holding nitrate and phosphate is still the main fix.

When should I not buy a UV sterilizer for dinos? Skip it if your dinos are a sand- or rock-bound type (often Amphidinium or Prorocentrum), if nitrate and phosphate are still reading zero, if you have no way to throttle flow to the unit, or if you have no space to plumb and service it.

References

Stop guessing at your water chemistry

Coral Compass is building a reef log: record your test results, see trend charts, and get test and dosing reminders. Join the waitlist for early access and launch pricing. We only email about the launch.

Need a dose right now? Use the free dosing calculator.