Quick answer: Pinch green hair algae off at the base and siphon it straight out of the tank. Don’t brush it loose in the display, because fragments drift and regrow. Then find what is feeding it: food, source water, trapped detritus or phosphate leaching from rock. Export the excess with water changes, a protein skimmer, phosphate media or a refugium, and add grazers that suit your tank. Keep testing as you go, and aim to bring phosphate and nitrate down to a low, measurable level, not zero, so you don’t trade hair algae for dinoflagellates.
- Remove: pinch and siphon weekly, or scrub rock outside the tank. Never scrub it loose in the display.
- Starve: track down the nutrient source first, then export the extra.
- Graze: snails, hermits and urchins keep new growth short; fish like tangs and rabbitfish need a tank big enough for them.
- Don’t overshoot: a zero phosphate reading in an algae-covered tank usually means the algae is eating it, not that there’s none.
Confirm it is hair algae
“Green hair algae” (GHA) isn’t one species. Bulk Reef Supply describes it as a catch-all name for many different green filamentous algae, and Reef Cleaners’ algae ID guide notes that true species-level ID takes a microscope. What matters for treatment is telling it apart from the look-alikes, because some of them need a different plan.
| What you see | Likely | What to do |
|---|---|---|
| Soft, fine, bright green strands in tufts on rock; pulls off easily and goes limp out of water | Green hair algae | This guide |
| Stiffer, feathery fronds with a central stem and side branches; grows from a mat on the rock | Bryopsis | A different, harder problem. Grazers and nutrient control often fall short. Research it separately before treating; this guide doesn’t cover medication. |
| Coarse, wiry “spaghetti” tumbling loose | Chaetomorpha (chaeto) | Usually wanted. See our refugium and chaeto guide. |
| Slimy red, purple or green sheets that peel off | Cyanobacteria | See clearing cyanobacteria. |
| Brown, snotty strands with bubbles, often worse in the afternoon | Dinoflagellates | See dinoflagellates in a reef tank. |
The texture cues for GHA and Bryopsis follow Reef Cleaners and TheSea.Org. If you can see a root-like mat or a stiff branching structure, Reef Cleaners says it is probably not GHA. For a side-by-side diagnostic by water test, see our algae outbreak and water testing guide.
Manual removal that exports biomass
Every strand you pull out takes the phosphate and nitrate it has absorbed out of the system with it. Bulk Reef Supply’s algae guide compares it to harvesting macroalgae from a refugium, only from the display. The method that works is pinch and siphon:
- Turn off the powerheads so loose bits don’t blow around the tank.
- Start a siphon into a bucket. Narrow tubing, such as 1/4-inch RO line, reaches into tight rockwork, a tip from Bulk Reef Supply.
- Pinch each tuft at the base with your fingers or tweezers and pull it straight into the siphon, so nothing floats free.
- Count it as a partial water change. Top the tank up with fresh, matched saltwater. Our water change guide covers mixing and temperature.
- Repeat weekly, or as soon as new tufts appear.
For a rock that is carpeted, take it out and scrub it in a bucket of tank water or saltwater, outside the display. Bulk Reef Supply’s nuisance algae guide notes that even a tiny piece left behind can regrow, so a heavily covered rock may need this more than once. As a last resort, BRS also describes spot-treating exposed patches with hydrogen peroxide after lowering the water level. It warns that peroxide doesn’t kill the base of the algae, so it only buys time for the other steps. Keep it off corals and follow the product label.
Find the nutrient path before you buy anything
Hair algae needs light and nutrients. Light is rarely the thing to cut, since your corals need it. The fix is finding where the extra phosphate and nitrate come from:
Disclosure: Coral Compass may earn a commission when you buy through links on this page, at no extra cost to you. Retailer links are marked as sponsored, and this doesn't change what we recommend. Full disclosure.
- Food. Overfeeding is the most common source. Bulk Reef Supply’s advice is blunt: if nitrate or phosphate keep rising, feed less, or add filtration until they stop rising.
- Source water. Check your RO/DI output with a TDS meter. Anything above zero after the DI stage means it’s time to replace the resin, and Bulk Reef Supply suggests testing source water if nutrients stay high after water changes. See our RO/DI water guide and RO/DI buying guide; if your unit isn’t up to it, RO/DI systems at Bulk Reef Supply (affiliate link).
- Trapped detritus. Filter socks that sit full for days, dead spots in the rockwork and a dirty sand bed all release nutrients as waste breaks down. Change socks often or compare filter socks vs fleece rollers, and see our reef tank flow guide for dead spots.
- Rock. Bulk Reef Supply notes that hair algae favors bare rock, especially old reef rock that leaches phosphate from earlier die-off. It can keep feeding algae even when the water tests low.
Test nitrate and phosphate on a schedule and write the results down, so you can see whether they are falling. Our test kit guide and test kit buying guide compare options, and you can log readings with the free reef test log. To check the shelf: reef test kits at Bulk Reef Supply (affiliate link).
Export options
| Method | What it removes | Watch out for |
|---|---|---|
| Water changes | Dissolved nitrate and phosphate, if your new water is clean | Only as good as your RO/DI and salt |
| Protein skimmer | Organic waste before it breaks down | Undersized or poorly tuned skimmers pull less |
| Phosphate media (GFO, lanthanum) | Phosphate | Easy to overshoot; start small and test often |
| Refugium or algae scrubber | Nitrate and phosphate, by growing algae you control | Needs light, flow and regular harvests |
| Fleece roller or fresh socks | Particles before they rot | Socks must be changed, rollers need power and fleece |
Water changes: regular changes dilute nutrients directly. Use the water change calculator to size them, and our salt mix guide to choose a salt. To browse: reef salt mixes at Bulk Reef Supply (affiliate link).
Skimming: a well-sized skimmer pulls organics out before they turn into nitrate and phosphate. Our protein skimmer guide explains sizing; to compare: protein skimmers at Bulk Reef Supply (affiliate link).
Phosphate media: GFO or lanthanum lowers phosphate faster than husbandry alone, which is exactly why it can overshoot. Start with a small amount, test every few days, and stop well above zero. Our phosphate guide covers GFO and lanthanum, and the nitrate-to-phosphate ratio calculator helps you see which nutrient is out of line. To compare media: nutrient control at Bulk Reef Supply (affiliate link).
Refugium or algae scrubber: growing chaeto or turf in a lit chamber gives the nutrients somewhere else to go, and you remove them each time you harvest. See our refugium and chaeto guide and the glossary entry for an algae turf scrubber.
Don’t crash nutrients to zero
A tank covered in hair algae often tests at zero phosphate. As our algae testing guide explains, that usually means the algae is taking up phosphate as fast as it appears, not that there is none. Bulk Reef Supply makes the same point and suggests a working range of about 0.02 to 0.06 ppm phosphate and 5 to 10 ppm nitrate. If you keep adding media or carbon until the test reads zero, you risk starving corals, and very low nutrients are a common setup for dinoflagellate blooms. Pull the algae out, lower inputs, and use the test kit to keep both numbers on the board. For the bigger picture, see our nitrate and phosphate balance guide and nitrate and phosphate basics.
Grazers: match them to your tank
Hair algae is soft and palatable, so many reef-safe herbivores will eat it, Bulk Reef Supply says. But Reef Cleaners notes that it grows fast enough to persist even in a tank with plenty of grazers. Treat a cleanup crew as a way to keep short regrowth down, not as the whole cure. There’s no reliable ranking of which grazer works best; animals vary, and what suits a 20-gallon tank won’t suit a 150.
| Grazer | Named by | Caveats |
|---|---|---|
| Snails: Mexican turbo, black banded trochus, Astraea | BRS | Best on short growth; large snails can knock over unglued frags; they starve when the algae is gone |
| Hermit crabs, emerald crabs | BRS, Reef Cleaners | Crabs are opportunists and may pick at other things once algae runs low |
| Tuxedo or pincushion urchins | BRS | Can dislodge loose frags and rockwork as they move |
| Sea hares | BRS, Reef Cleaners | Eat a lot, then starve once the algae is gone; plan where one goes next |
| Tangs (especially Zebrasoma), rabbitfish, algae blennies | BRS | Need a tank big enough for the adult fish; rabbitfish have venomous spines; check temperament with your other fish |
Bulk Reef Supply’s nuisance algae guide stresses that fish only make sense if your tank is big enough to house them. Look up the adult size and minimum tank size for any fish before you buy it. Copepods are not a hair algae fix: BRS says pods eat microalgae, not hair algae, though a healthy pod population supports a balanced tank. For more on choosing a cleanup crew and dealing with other pests, see our reef tank pests and diseases guide.
Timeline and relapse
Expect weeks, not days. Bulk Reef Supply says that with regular removal and nutrients under control, growth should start to slow after a few weeks or more. TheSea.Org notes that GHA regrows from the holdfast even after you pull the strands, which is why the first round of pulling never finishes the job.
- Weeks 1–2: pull and siphon weekly, fix the obvious inputs (feeding, socks, RO/DI), start testing on a schedule.
- Weeks 3–6: regrowth should be shorter and slower. Add or adjust export only if nutrients aren’t falling.
- After that: keep grazers on short regrowth and keep logging nitrate and phosphate. A rising trend is your early warning.
Relapse usually means a nutrient source came back or was never found: more food, an exhausted DI resin, a sock left too long, or a rock still leaching. Prevention starts at the door, too. Bulk Reef Supply suggests brushing or removing frag plugs and scrubbing snail and hermit shells before they go in; our coral quarantine checklist and acclimation and dipping guide cover the steps.
What not to do
- Brush or scrape it loose in the display. Fragments drift and settle somewhere new.
- Chase a zero test. Low and measurable beats zero.
- Buy a fish the tank can’t hold to solve a temporary algae problem.
- Treat Bryopsis like GHA, or treat GHA with medications meant for Bryopsis, without confirming the ID.
- Cut coral lighting hard. It may slow algae but costs coral health; fix nutrients instead.
Frequently asked questions
What causes green hair algae in a reef tank?
Two things have to come together: spores or fragments that got in, usually on live rock, sand, frags, plugs or snail shells, and enough light and nutrients for them to grow. Bulk Reef Supply points to phosphate and nitrate as the fuel, plus rock that leaches phosphate. Common sources are heavy feeding, source water with a high TDS reading, detritus trapped in filter socks or rockwork, and old or dead rock.
Will snails alone clear hair algae?
Usually not once it is long. Snails, hermits and urchins are good at grazing short new growth on rock, which is why a cleanup crew is best added early. Long, thick tufts generally need to be pulled out by hand, and the nutrient supply has to come down, or the algae keeps growing faster than the crew can eat it.
Should phosphate be zero to kill hair algae?
No. A tank covered in algae often tests at or near zero because the algae is taking phosphate up as fast as it appears, so a zero reading doesn’t mean the problem is solved. Pushing phosphate and nitrate to zero on purpose can starve corals and open the door to dinoflagellates. Bulk Reef Supply suggests roughly 0.02 to 0.06 ppm phosphate and 5 to 10 ppm nitrate as a working range.
Does pulling hair algae make it worse?
Pulling it out and siphoning it away right away helps, because it removes the algae and the nutrients locked inside it. What makes it worse is brushing or scraping it loose in the display, where fragments drift off and settle somewhere new. Pinch it at the base and siphon it straight out, or scrub rock outside the tank.
How long does it take to get rid of green hair algae?
Plan on weeks, not days. Bulk Reef Supply says that with regular manual removal and nutrients under control you should see growth start to slow after a few weeks or more. Holdfasts left on the rock regrow, so keep pulling new tufts and keep testing until it stops coming back.
Is green hair algae the same as chaeto?
No. Chaetomorpha (chaeto) is a coarse, wiry macroalgae that hobbyists grow on purpose in a refugium to export nutrients. Green hair algae is fine and soft, and grows attached to rock in the display. Both are green and stringy, but chaeto tumbles loose in a lit sump chamber and gets harvested, while hair algae is a pest you remove.
Sources and scope
Sources checked November 12, 2026. Bulk Reef Supply and Reef Cleaners sell supplies or livestock; their pages are cited for husbandry advice, not as independent efficacy data. Nutrient ranges are Bulk Reef Supply’s suggested working range, not a rule. No hands-on tests, grazer success rates, prices or ratings are claimed here, and this guide gives no medication dosing.
- “Get Rid of Green Hair Algae for Good,” Bulk Reef Supply
- “Common Nuisance Algae and How to Treat Them,” Bulk Reef Supply
- “Learn How To Control And Prevent Algae For Good” (5-Minute Saltwater Aquarium Guide, ep. 25), Bulk Reef Supply
- “Aquarium Algae Control: Diatoms, Cyano and Green Hair Algae, Part 1,” Bulk Reef Supply
- “EP 9: The Best Way to Prevent and Wipe Out Algae and Diatoms in a Reef Tank: Copepods,” Bulk Reef Supply
- “Nuisance Algae ID Guide,” Reef Cleaners
- Blane Perun, “Green Hair Algae in Reef Tanks: Practical Management Guide,” TheSea.Org
Shop only for a confirmed gap
Most hair algae fixes cost little: a siphon, a bucket and steady testing. The links below go to retailer category pages, not to specific product recommendations or stock checks.
Reef test kits at Bulk Reef Supply (affiliate link)