What we'd buy, and where the numbers come from
Disclosure: Coral Compass may earn a commission when you buy through links on this page, at no extra cost to you. Retailer links are marked as sponsored, and this doesn't change what we recommend. Full disclosure.
Every spec below was read on Nov 15, 2026 from the maker where its page prints one (Sicce, EcoTech, Red Sea, Lifegard, Neptune and Innovative Marine) and from Bulk Reef Supply's listing for all twelve pumps. Where the two disagree, both numbers are shown. The flow figures in the tables are our own modeled results, not bench tests. We print no prices, because they change daily. Browse return pumps at Bulk Reef Supply(affiliate link) opens the whole category (124 pumps when we looked), so search for the model name.
How much return flow does a reef tank need?
Our calculator uses 3 to 10 display turnovers an hour through the sump as its working range. That is common hobby practice rather than a standard, and your overflow, skimmer and any reactor set the real ceiling. The table converts it to the flow you need at your head. Use your display volume, not total system water.
| Display | 3× / hr (gph) | 5× / hr (gph) | 10× / hr (gph) |
|---|---|---|---|
| 20 gal | 60 | 100 | 200 |
| 40 gal | 120 | 200 | 400 |
| 55 gal | 165 | 275 | 550 |
| 75 gal | 225 | 375 | 750 |
| 90 gal | 270 | 450 | 900 |
| 120 gal | 360 | 600 | 1,200 |
| 150 gal | 450 | 750 | 1,500 |
Arithmetic only: display gallons × turnovers. Most mixed reefs sit in the middle column; SPS-heavy tanks push toward the right, and a fish-only or soft coral tank can live on the left.
Why the box number is wrong: a worked head-loss example
A return pump's box rating is flow at zero head, meaning no lift and no pipe. The moment it pushes water up to the display, flow falls along its curve until it meets the curve of your plumbing. The system side is two terms: vertical lift from the sump surface to the outlet, plus friction that grows with flow. We use the Hazen–Williams formula the calculator uses, friction loss in ft = 0.002083 × length × (100 / 150)1.85 × gpm1.85 / diameter4.8655, with C = 150 for PVC, Sch 40 inside diameters (1 in = 1.049 in), and each fitting counted as an equivalent length of straight pipe (a 90° elbow is 30 pipe diameters, a ball valve open 3, a swing check 100).
Build A, the calculator's sample: 75 gal display, 1 in pipe, 5 ft lift, 8 ft of pipe, four 90° elbows and one ball valve. The fittings add 10.75 ft of equivalent length, so the pipe counts as 18.75 ft. At the SDC 6.0's 663 GPH the friction is about 1.2 ft, so total head is 5 + 1.2 = 6.2 ft. That is where the straight-line SDC 6.0 curve and the plumbing curve cross. The calculator's own sample pump (an illustrative curve, not a real model, rated 1,000 GPH at 0 ft) lands at 638 GPH at 6.2 ft, 8.5× an hour on this tank.
The same pumps on three builds
Build A is the sample above. B is a 40 gallon breeder with a short run in 3/4 in pipe. C is a 120 gallon with a long run in 1 1/4 in pipe and a check valve. Each pump is modeled as a straight line from its published max flow to its max head. Modeled, not measured: real curves bow, so the true point can land either side. Read your own pump's chart into the calculator for a final answer.
| Build A | Build B | Build C | |
|---|---|---|---|
| Display | 75 gal | 40 gal breeder | 120 gal |
| Return pipe (Sch 40) | 1 in | 3/4 in | 1 1/4 in |
| Lift, sump to outlet | 5 ft | 3 ft | 7 ft |
| Straight pipe | 8 ft | 6 ft | 25 ft |
| Fittings | 4 × 90°, ball valve | 3 × 90°, ball valve | 6 × 90°, ball valve, swing check |
| Equivalent length added | 10.75 ft | 6.39 ft | 32.55 ft |
| Pump (box flow / max head) | Build A: 75 gal | Build B: 40 gal | Build C: 120 gal |
|---|---|---|---|
| Sicce Syncra SDC 3.0 800 gph / 7.5 ft | 246 gph 3.3× / hr | 379 gph 9.5× / hr | 52 gph stalls near its limit |
| Sicce Syncra SDC 6.0 1,450 gph / 11.5 ft | 663 gph 8.8× / hr | 700 gph 17.5× / hr | 494 gph 4.1× / hr |
| Sicce Syncra SDC 7.0 1,900 gph / 16.5 ft | 1,011 gph 13.5× / hr | 954 gph 23.8× / hr | 893 gph 7.4× / hr |
| EcoTech Vectra S2 1,400 gph / 11.5 ft | 647 gph 8.6× / hr | 688 gph 17.2× / hr | 480 gph 4.0× / hr |
| EcoTech Vectra M2 2,000 gph / 21.5 ft | 1,192 gph 15.9× / hr | 1,095 gph 27.4× / hr | 1,107 gph 9.2× / hr |
| Neptune COR-15 1,500 gph / 14 ft | 783 gph 10.4× / hr | 787 gph 19.7× / hr | 647 gph 5.4× / hr |
| Maxspect Jump DC 6K 1,585 gph / 14 ft | 813 gph 10.8× / hr | 809 gph 20.2× / hr | 675 gph 5.6× / hr |
| Red Sea ReefRun G2 4000 1,060 gph / 11.2 ft | 513 gph 6.8× / hr | 580 gph 14.5× / hr | 366 gph 3.0× / hr |
| Lifegard Quiet One PRO 2200 594 gph / 10.7 ft | 300 gph 4.0× / hr | 376 gph 9.4× / hr | 199 gph 1.7× / hr |
| Sicce Syncra Silent 3.0 714 gph / 9.9 ft | 329 gph 4.4× / hr | 416 gph 10.4× / hr | 201 gph 1.7× / hr |
Three things stand out. The ranking changes with the build: on C, the Vectra M2 and S2 differ by 1.4× on the box (2,000 vs 1,400 GPH) but by 2.3× once the 7 ft lift and long run take their share (1,107 vs 480 GPH). The SDC 3.0 is plenty on the small build (379 GPH) and nearly stalls on C (52 GPH), because 7 ft of lift is almost its whole 7.5 ft of head. And on B the SDC 3.0 and the Quiet One land near 9 to 10×, while the bigger DC pumps run at 14 to 27× and have to be turned well down; an AC pump can only be throttled with a valve.
What each plumbing choice costs: the SDC 6.0 on Build A
Change one thing at a time and watch the same pump:
| Change from Build A | Real flow | Total head | vs Build A |
|---|---|---|---|
| None (1 in pipe, 5 ft lift) | 663 gph | 6.2 ft | — |
| 3/4 in pipe instead of 1 in | 528 gph | 7.3 ft | -20% |
| 1 1/4 in pipe instead of 1 in | 757 gph | 5.5 ft | +14% |
| Add a swing check valve | 618 gph | 6.6 ft | -7% |
| Eight 90° elbows instead of four | 610 gph | 6.7 ft | -8% |
| 8 ft of lift instead of 5 | 384 gph | 8.5 ft | -42% |
Lift is the expensive term because it is fixed: three more feet cost 42% of the flow, while a pipe size up gains 14% for the price of fittings. Measure the lift from the sump's running water surface, not the floor of the cabinet. For more on turnover and flow patterns see how much flow a reef tank needs.
Max head, maker vs BRS
We checked every pump against its maker page and against BRS. For seven of twelve the two match. For the other five, max head comes from BRS (and dealers) alone, and in one place BRS contradicts itself.
| Pump | Maker, read Nov 15, 2026 | BRS listing | Verdict |
|---|---|---|---|
| MightyJet Desktop 326 | Flow 174–326 gph, 15 W, tanks up to 25 gal. Max head not printed on its spec page. | 326 gph, 18 in (BRS staff repeat 18 in in a Q&A); category bracket “under 5 ft” | Max head is BRS only. Treat it as 1.5 ft. |
| MightyJet Midsize 538 | Flow 187–538 gph, 22 W, tanks up to 50 gal. Max head not printed. | 538 gph, 24 in; bracket “under 5 ft” | Max head is BRS only. Treat it as 2 ft. |
| Syncra SDC 3.0 | 260–800 gph, 7.5 ft, 6–35 W (Sicce manual) | Same figures; bracket “5–10 ft” | Agree. |
| Syncra SDC 6.0 | 530–1,450 gph, 11.5 ft, 10–40 W | Same figures | Agree. |
| Syncra SDC 7.0 | 800–1,900 gph, 16.5 ft, 20–65 W | Same figures | Agree. |
| Vectra S2 | 1,400 gph, 11.5 ft, 1 in in / 0.75 in out (EcoTech) | Same flow and head; 72 W supply | Agree. EcoTech prints no wattage on the page we read. |
| Vectra M2 | 2,000 gph, 21.5 ft, 1.25 in in / 1 in out | Same flow and head; 96 W supply | Agree. Only pump here with a published head over 20 ft. |
| ReefRun G2 4000 | 530–1,060 gph, 11.2 ft, 16–38 W (Red Sea manual) | Same figures; bracket “10–15 ft” | Agree. |
| Jump DC 6K | Not read at Maxspect | 740–1,585 gph, 14 ft, 70 W | BRS only. |
| COR-15 | 1,500 gph, 50 W, needs an Apex and a 1LINK port (Neptune). Max head not on that page. | 1,500 gph, 14 ft, under 50 W | Head is BRS and dealer copy. BRS's Apex field says “No” while its own text says an Apex is required; Neptune says required. |
| Quiet One PRO 2200 | 594 gph, 10.7 ft, 38 W, 1 in MPT (Lifegard) | Same figures | Agree. AC. |
| Syncra Silent 3.0 | Not read at Sicce | 714 gph, 9.9 ft, 48 W, AC | BRS only. |
Do not pick a pump by its max head. At max head it moves almost no water. Pick the pump whose curve still gives the flow you want at your total head, and leave margin.
All-in-one tanks: the under-2-ft rule
An AIO return is a pump in the back chamber lifting water about a foot. The published max head of the MightyJet Desktop is 18 in and the Midsize is 24 in, so they suit exactly that and nothing taller: in our model both give zero flow at the 3 ft lift of Build B. If your display sits more than about 2 ft above a sump, skip them and start from the SDC 3.0. Fit matters as much as flow here; the all-in-one tank guide lists which chamber takes which pump. Browse all-in-one tanks at Bulk Reef Supply(affiliate link).
DC or AC return pump?
DC pumps (Sicce SDC, Vectra, COR, ReefRun G2, Jump, MightyJet) let you set flow in steps, add feed and pulse modes, and buy headroom you then turn down. They cost more, and the electronics are the part that fails: BRS reviews of the EcoTech Vectra M2 (55%, 22 reviews) describe failures after roughly 18 to 24 months, flow that drifts, and Mobius pairing trouble, alongside owners running them 3 to 4 years (and a first-generation M1 for 7) without a fault. The AC pumps here (Quiet One PRO 2200, Syncra Silent 3.0) have no controller to break and run on a valve. They use more power for their flow and cannot dim for feeding. We'd still choose DC for anything that must be quiet or has a variable overflow, and AC for a simple, fixed system where an owner would rather replace a pump than debug an app.
Return pump or powerhead?
They do different jobs. A return pump carries water between the sump and the display, and its flow is the turnover number above. A powerhead or wavemaker stirs water inside the display and moves several times that volume, with no plumbing. Budget return flow for filtration (3 to 10× an hour) and wavemakers for coral flow; one does not replace the other. See our wavemaker and powerhead guide. Browse powerheads at Bulk Reef Supply(affiliate link).
How we review: we compare maker pages with BRS listings and flag every place they disagree. We haven't tested these pumps. BRS scores are customers' and are dated Nov 15, 2026; below 10 reviews we call it a small sample. Review summaries come from the review text on each BRS listing (we read all of them for the Vectra M2 and S2 and the ReefRun G2, and the score and count for the rest).
Our picks, smallest system to largest
Innovative Marine MightyJet Desktop AIO (326 GPH)
AIO return, desktop tanks (up to 25 gal)
- Specs
- 3.7 × 2.5 × 3.4 in, 174–326 GPH, 15 W, nine speeds plus a 10-minute feed mode from the included controller. Published max head 18 in (BRS).
- Why it makes the list
- Innovative Marine lists it for all of its Desktop Fusion and Desktop Concept tanks, and it ships with a controller and barbed adapters in the box.
- Weaknesses
- Head is 1.5 ft, so it does nothing in a sump system. The 82% score rests on 12 reviews.
- Who it's for
- Desktop AIOs and nano tanks where the water rises about a foot.
Search the list for “MightyJet Desktop”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- Innovative Marine spec page: flow, watts and 25 gal tank limit. Max head is not on it.
Innovative Marine MightyJet Midsize AIO (538 GPH)
AIO return, midsize tanks (up to 50 gal)
- Specs
- 4.88 × 2.75 × 3.6 in, 187–538 GPH, 22 W, same controller. BRS lists max head as 24 in.
- Why it makes the list
- Same drop-in design as the Desktop, rated by Innovative Marine for tanks up to 50 gallons and listed for all Midsize Fusion tanks; its 88% from 21 reviews is the highest score of any DC pump on this page.
- Weaknesses
- Two feet of head caps it at AIO chambers. Max head is a BRS figure; Innovative Marine's page doesn't print it.
- Who it's for
- Midsize Fusion-style AIOs where you want more flow than the stock pump.
Search the list for “MightyJet Midsize”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- Innovative Marine spec page: flow, watts, 50 gal tank limit.
Sicce Syncra SDC 3.0
Small sump system, 20 to 40 gal
- Specs
- 260–800 GPH, 7.5 ft max head, 6–35 W, 1 in GAS in and out, 24 V DC, controller included, five-year warranty with registration (BRS).
- Why it makes the list
- It is the smallest DC pump here with real lift. On Build B it makes 379 GPH (9.5×), more than a 40 gallon needs, and you can turn it down.
- Weaknesses
- Past 5 ft of lift it fades quickly: 246 GPH (3.3×) on Build A and 52 GPH on C. BRS and Sicce agree on 7.5 ft; plan on no more than about 4 ft of lift.
- Who it's for
- Nano-to-40 gallon sumps with a short, low return.
Search the list for “Syncra SDC 3.0”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- Sicce Syncra SDC manual (PDF): flow, head and wattage for 3.0, 6.0, 7.0.
Sicce Syncra SDC 6.0
Default pick, 40 to 90 gal sumps
- Specs
- 530–1,450 GPH, 11.5 ft, 10–40 W, 1 in connections, controller with Wi-Fi.
- Why it makes the list
- The 84% from 27 reviews is the largest DC sample on the page, it draws 10 to 40 W by Sicce's rating, and it fits Build A well: 663 GPH (8.8×). Sicce and BRS print the same specs.
- Weaknesses
- On a long run or 7 ft+ lift it runs out of head: Build C gives 494 GPH (4.1×).
- Who it's for
- First-time sump builders with a normal 4–6 ft head.
Search the list for “Syncra SDC 6.0”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- Sicce: Syncra SDC
Sicce Syncra SDC 7.0
120 gal and long runs
- Specs
- 800–1,900 GPH, 16.5 ft, 20–65 W. Same controller family as the 6.0.
- Why it makes the list
- It holds flow where the 6.0 gives up: 893 GPH (7.4×) on Build C against 494 GPH (4.1×) for the 6.0. Sicce and BRS agree on all specs.
- Weaknesses
- It draws up to 65 W against the 6.0's 40 W, and at 1,900 GPH it can outrun a modest overflow, so confirm your drain can take what it delivers. The 80% score has 21 reviews.
- Who it's for
- 120 to 150 gallon displays, or any plumbing with 7 ft of lift and 25 ft of pipe.
Search the list for “Syncra SDC 7.0”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- Sicce Syncra SDC manual (PDF)
EcoTech Vectra S2
Smart DC, mid-size (EcoTech)
- Specs
- 1,400 GPH, 11.5 ft, 1 in in and 0.75 in out, Mobius app control, BRS lists 72 W supply. EcoTech and BRS agree.
- Why it makes the list
- The Mobius app control and battery-backup compatibility are the draw, and the numbers match the SDC 6.0 on Build A (647 GPH (8.6×)).
- Weaknesses
- 69% from 15 BRS reviews: the low scores describe units dead on arrival, units stuck in a restart loop, failures near two years, and Mobius connection trouble; the high ones praise how quiet it is. Its 0.75 in outlet is smaller than the 1 in pipe we modeled, so expect some loss there.
- Who it's for
- EcoTech-ecosystem tanks where the app is the point. Otherwise the SDC 6.0 has the stronger track record in this sample.
Search the list for “Vectra S2”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- EcoTech: Vectra
EcoTech Vectra M2
Smart DC, high head (EcoTech)
- Specs
- 2,000 GPH, 21.5 ft, 1.25 in in and 1 in out, BRS lists 96 W supply. EcoTech and BRS agree.
- Why it makes the list
- It has the highest published head here, and the model gives 1,107 GPH (9.2×) on Build C. If you need 20 ft or more, there isn't another pump on this page.
- Weaknesses
- 55% from 22 BRS reviews, with owners describing failures around 18 to 24 months, flow fluctuation that upsets a skimmer, and repair costs after warranty. Others report 3 to 4 years on the M2, and 7 on a first-generation M1, with a yearly clean.
- Who it's for
- Deep builds that truly need the head, owners already invested in Mobius, and anyone who will keep a spare.
Search the list for “Vectra M2”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- EcoTech: Vectra
Neptune COR-15
Apex-controlled DC, mid-size
- Specs
- 1,500 GPH, 14 ft, under 50 W, 1 in in, 0.75 in out or a 1 1/4 in union, powered from a 1LINK port; Neptune lists A1, A2 and A3 Apex support.
- Why it makes the list
- Strong flow at modest wattage (783 GPH (10.4×) on Build A) with no power brick. The 75% from 20 reviews is a middle-of-the-pack record.
- Weaknesses
- It does not run without an Apex and a free 1LINK port, per Neptune. BRS's “Apex Compatible: No” field contradicts its own description, so rely on Neptune's page. Max head (14 ft) comes from BRS and dealers; Neptune's COR page doesn't print it.
- Who it's for
- Apex owners who want the pump under the same controller.
Search the list for “COR-15”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- Neptune Systems: COR: flow, power, Apex requirement.
Maxspect Jump DC 6K
Budget-to-mid DC, mid-size
- Specs
- 740–1,585 GPH, 14 ft, 70 W, 1 and 1.25 in barbs (BRS).
- Why it makes the list
- On paper it is comparable to the COR-15 (813 GPH (10.8×) on Build A) and comes with a four-button controller with feed and pulse modes.
- Weaknesses
- 80% from only 4 reviews, so the score says little. We didn't read a Maxspect page, so all specs are BRS and dealer copy. It draws more power than the SDC 6.0.
- Who it's for
- Shoppers who want DC control and are comfortable with a thin review record.
Search the list for “Jump DC 6K”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
Red Sea ReefRun G2 4000
Compact DC, small sumps (Red Sea)
- Specs
- 530–1,060 GPH, 11.2 ft, 16–38 W, 3/4 in connections; Red Sea's manual and BRS agree. ReefBeat Wi-Fi control needs the separate Dual Controller.
- Why it makes the list
- Quiet and well built per owners, with plenty of fittings in the box.
- Weaknesses
- 55% from only 4 reviews, but two of the four report far less flow than the box (one “less than 500” at 100% with 5 ft of head, one around 330 with a UV sterilizer plumbed in). Our model gives 513 GPH (6.8×) on Build A, which is the same ballpark. No feed mode on the built-in controller, per one owner.
- Who it's for
- Small to mid sumps on 3/4 in plumbing, if the Red Sea ecosystem matters to you.
Search the list for “ReefRun G2 4000”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- Red Sea ReefRun G2 manual (PDF)
Lifegard Quiet One PRO 2200
Simple AC, small to mid sumps
- Specs
- 594 GPH, 10.7 ft, 38 W, 1 in MPT in and out, 6 ft cord, flow-control valve on the intake grill. Lifegard and BRS agree.
- Why it makes the list
- No electronics. In our model it gives 376 GPH (9.4×) on Build B, which suits a 40 gallon, and throttling is by valve.
- Weaknesses
- Fixed flow, so it can't dim for feeding, and it fades faster against head (199 GPH (1.7×) on Build C).
- Who it's for
- Fixed 30 to 55 gallon systems where a replaceable pump beats an app.
Search the list for “Quiet One PRO 2200”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
- Lifegard Aquatics: Quiet One PRO 2200
Sicce Syncra Silent 3.0
Simple AC, mid sumps
- Specs
- 714 GPH, 9.9 ft, 48 W, AC, per BRS. We didn't read a Sicce page for it.
- Why it makes the list
- The 88% from 42 reviews is the biggest sample on this page, and the model gives 416 GPH (10.4×) on Build B and 329 GPH (4.4×) on Build A.
- Weaknesses
- No speed control and a 48 W draw for roughly 330 GPH on Build A, against 10–40 W for the DC SDC 6.0 at higher flow.
- Who it's for
- A proven, no-app AC choice for a sump with a short return.
Search the list for “Silent 3.0”: Browse return pumps at Bulk Reef Supply(affiliate link).
Sources
- Bulk Reef Supply product listing, read Nov 15, 2026
Return pump FAQ
What size return pump do I need? Take your display volume and multiply by 3 to 10 turnovers an hour, then pick a pump whose curve still delivers that at your total head. Total head is lift from sump to outlet plus friction in the pipe and fittings. For a 75 gallon that means 225 to 750 GPH at your head, not on the box.
How do I calculate head loss for a return pump? Add the vertical lift to the friction loss at your target flow. Friction uses Hazen-Williams: 0.002083 x length x (100/150)^1.85 x gpm^1.85 / diameter^4.8655, with each fitting converted to an equivalent length of pipe. Our calculator does it for you from your pipe size, run and fittings.
Why is my return pump flow lower than its box rating? The box number is flow with no lift and no pipe. On our 75 gallon example, 5 ft of lift plus friction cut a 1,450 GPH pump to about 663 GPH. Each added elbow, check valve or smaller pipe size takes more.
Is a DC return pump better than AC? DC lets you turn flow down, add feed modes and integrate with a controller; AC is simpler and has no electronics to fail, but flow is fixed. We prefer DC for quiet or variable setups and AC for simple fixed systems.
Can I use a MightyJet as a return pump on a sump system? Only if the water lifts about 1.5 to 2 ft. The Desktop's published max head is 18 in and the Midsize's 24 in, and both stall in our model at 3 ft of lift. For a sump below the display, start from the Syncra SDC 3.0.
How much return flow do I need for a 40 gallon tank? About 120 to 400 GPH at your head. On our 40 gallon build, an SDC 3.0 delivers about 379 GPH at 3 ft of lift in 3/4 in pipe, which is near 10 turnovers and can be turned down.
Sources and what we checked
Everything here was read on Nov 15, 2026. Ratings and scores are the sellers' and makers', not our tests.
- Bulk Reef Supply product listings for all twelve pumps (specs, score, review count and review text where noted) and the BRS return pump category.
- Makers: Sicce Syncra SDC manual (PDF), EcoTech Vectra, Red Sea ReefRun G2 manual (PDF), Lifegard Quiet One PRO 2200, Neptune COR, MightyJet Desktop and Midsize spec pages.
- Not read at the maker: the Maxspect Jump DC 6K and the Sicce Syncra Silent 3.0 (figures from BRS and dealer copies). Max head for the two MightyJets and the COR-15 is not printed on the maker pages we read.
- Head-loss math: the formula and fitting equivalents our own return pump head loss calculator uses (Hazen-Williams, C = 150, Sch 40 inside diameters). The pump curves are straight lines between published endpoints, so every flow figure is modeled, not measured.
Spot an error or a pump we should add? Specs and availability change often, so always check the manufacturer's current listing.