Quick answer: Choose a rack only when the exact magnet, tank panel and plugs match. A large advertised frag count does not prove the rack fits your wall, coral spacing or service route.
Print the dimension card or copy it into your notes. The page doesn't store your entries.
What an exact-model specification can tell you
AvidAqua’s Manta Ray specifications list glass/acrylic up to 1/2 inch (13 mm), plug stems 10–14 mm in diameter and 10–25 mm long, with tops 18–53 mm. These are manufacturer-published dimensions for that model, not our load test or a rating for every magnetic rack. They demonstrate why “fits standard plugs” is insufficient. Verify the current version before ordering; we are not asserting BRS stocks this model.
Dimension card: measure both sides of the panel
| Check | My measurement / units | Exact model limit / source | Pass / unknown |
|---|---|---|---|
| Panel material and thickness at the mounting point | ________________ | ________________ | ________________ |
| Outside magnet access including trim and wall gap | ________________ | ________________ | ________________ |
| Rack width × projection into tank | ________________ | ________________ | ________________ |
| Plug stem diameter and usable length | ________________ | ________________ | ________________ |
| Plug top diameter and intended coral spacing | ________________ | ________________ | ________________ |
| Vertical removal distance and cleaning-tool path | ________________ | ________________ | ________________ |
Measure the panel, not a rim or nominal tank capacity. Keep inside and outside magnet space separate: an overflow box, rear wall or cabinet can block the outside half. A rack that fits below a brace may not lift out past that brace with corals attached. Record the actual plug rather than assuming every ceramic or aragonite stem is interchangeable.
Buy, reuse or skip the magnetic upgrade
| Situation | Decision | What settles it |
|---|---|---|
| Existing holder is stable, intact and fits the planned plugs | Keep it; no new rack needed | Check its condition and service access against its own instructions |
| Exact rack model has a documented panel and plug match | Consider buying only if you need the extra holding space | Confirm footprint, coral spacing, included magnet version and current availability |
| Wall thickness or material is outside the stated range | Skip that model | Ask the maker for a documented alternative; do not stack magnets or improvise an adapter |
| Plug retention is unknown or removal route is blocked | Pause | Get measurements or choose a different location/holder rather than forcing stems |
Suction and magnetic holders have different attachment and maintenance requirements; neither is universally safest. A compatible existing holder can be the lower-cost choice without being a new product recommendation. Inspect wet and dry components as the maker directs. Stop using damaged or compromised components and ask the manufacturer about replacement.
Why frag count is not usable capacity
Count is the number of positions, not the number of mature corals you can place without contact. Sketch the expanded coral footprint and leave access for handling. Check shading, flow and whether the rack can be moved without scraping the glass or striking rockwork. Keep magnet handling and pinch warnings from the exact instructions in the buying checklist.
Example: the outside magnet you can't reach
Fictional worksheet example: the panel and plug diameter match a candidate’s published limits, but the owner cannot reach the outside magnet behind the tank. Result: skip that mounting point. A higher advertised capacity would not fix access. Reusing a compatible holder elsewhere may avoid a purchase entirely.
Four made-up plugs against the published limits
The Manta Ray specifications list plug stems of 10–14 mm in diameter and 10–25 mm long, with tops of 18–53 mm, on glass or acrylic up to 1/2 inch (13 mm). Here's how invented plugs would score against those limits.
| Plug | Stem diameter | Stem length | Top | Result |
|---|---|---|---|---|
| A | 12 mm | 15 mm | 40 mm | Inside all three published ranges |
| B | 16 mm | 15 mm | 40 mm | Stem too thick (limit 14 mm) |
| C | 12 mm | 8 mm | 30 mm | Stem too short (minimum 10 mm) |
| D | 12 mm | 15 mm | 60 mm | Top too wide (limit 53 mm) |
A matching stem diameter, like plug C's, still failed. The panel needs the same treatment: 3/8 inch glass (9.5 mm) is inside the limit, while 5/8 inch (about 16 mm) is over it. These are the published figures for one model, so check the current specifications before you rely on them.
Complete the missing-parts list
| Item | Already have | Missing / verify | Buy or reuse |
|---|---|---|---|
| Compatible rack and correct magnet pair | ________________ | ________________ | ________________ |
| Plugs that fit without modification | ________________ | ________________ | ________________ |
| Access for inspection and cleaning | ________________ | ________________ | ________________ |
This is a fit guide, not a coral-cutting tutorial. For cutting, glue and tool safety see coral fragging; for separate observation equipment see coral quarantine planning.
Frequently asked questions
Can I choose by tank gallons?
No. The panel material and thickness, magnet version, rack footprint and plug dimensions determine fit.
Does a matching stem diameter prove compatibility?
No. Check stem length, top diameter, retention method and room to insert and remove the frag as well.
Source and scope
Source checked November 8, 2026: AvidAqua's published Manta Ray specifications. They apply to that model only. We haven't load-tested any rack, and we aren't claiming BRS stocks this one.
If a rack passes the dimension card
The links go to category pages, not to a specific rack, and they aren't a stock check. If your current holder is stable and fits your plugs, there's nothing to buy. If a rack passed every row, confirm the magnet version and availability with the retailer or maker.
Disclosure: Coral Compass may earn a commission when you buy through links on this page, at no extra cost to you. Retailer links are marked as sponsored, and this doesn't change what we recommend. Full disclosure.
Shop fragging supplies at Bulk Reef Supply (affiliate link)